Operation Tool Link dialog box gives information about the Operation in association with the Tool Type and also its usage defined along with the Parameters and Unit Of Measurement. In this screen the link between the operation and tool types are defined. You can specify the usage of the tool, i.e. whether the tool type is specific to a model or if it is a common tool type. You can select the parameters of the tool type and also specify its unit of measurement.
To add a link for operation and tool type, click on the Add button. All the operations defined in the Process master are displayed in the Operation drop down list box. Select an Operation and then a tool type from the Tool Type drop down list box. By default the Tool Usage is common. If the Tool Type is specific to a model, then click on the Model Specific option button and also select its corresponding Model from the Model Code drop down list box. The Parameters of the Tool Type are displayed in the list provided in the screen. Checkboxes are provided for each parameter. For selecting a parameter, check the checkboxes corresponding the parameter. On checking a checkbox, a drop down list box is displayed under the column entitled Unit Of Measurement. The units of measurements defined in the Unit Of Measurement screen are available in the drop down list box. Select the appropriate unit of measurement for the parameters. Click on Save button, to save the added link.
Click on Modify button to modify the record. You can Modify the Tool Usage, select or deselect Parameters and change the Unit Of Measurement, only if Model has not been defined for the selected Operation and Tool Type, in the Model Tool Link screen.
Click on Delete button to delete the record. You can delete a record, only if Model has not been defined for the selected Operation and Tool Type, in the Model Tool Link screen.